Specifications

TECHNICAL SUPPORT 1 800 908 0884
10
All openings of a horizontal slide gate are guarded or screened from the bottom of
the gate to a minimum of 4 feet (1.22 m) above the ground to prevent a 2-1/2 inch
(57.2 mm) diameter sphere from passing through the openings anywhere in the gate,
and in that portion of the adjacent fence that the gate covers in the open position.
Gate
Safety Guard
Fixed Pulley
Route Chain
As Shown
Detail of Rear Install Chain Route
Gate Operator
Concrete Pad
Gate Operator
Concrete Pad
Gate Operator
Gate Operator
Gate In Open Position Gate In Closed Position
Gate In Open Position Gate In Closed Position
Track Concrete Pad See Detail Below
Gate Operator
Concrete Pad
Track Concrete Pad
Gate Operator
Concrete Pad
Gate Operator
Concrete Pad
Track Concrete Pad
Track Concrete Pad
Figure B
Plan of Rear Installation
PLANS OF INSTALLATION PLANS OF INSTALLATION
Figure A
Plan of Front Installation