Specifications

CSWI SWING OPERATOR
The CSWI is designed for use on gates with a maximum
weight of 1800 pounds and a maximum width of 30 feet. The
gate will travel from open to close in approximately 13 seconds
and is rated for a maximum of 45 cycles per hour. The CSWI is
available from 1/2—1-1/2 HP in single for three phase. The
drive arm is easily disconnected for manual operation in case
of power failure. This unit is UL 325 listed for use in Class 1
through Class IV applications.
SWINGSMART
Swingsmart delivers that same uncompromising
quality to commercial and residential customers,
where ease of use, elegant operation, low maintenance
and high reliability are expected. Operates after
power loss. Uninterruptible battery power provides up
to 300 gate cycles after AC loss. SwingSmart can also
power your access control and safety devices.
POWERMASTER
HYSECURITY
G-5 SWING GATE OPERATOR
With its compact, low profile design and the power to support
700 lbs of weight along with gate lengths of up to 16 feet, the
Viking G-5 will revolutionize the idea of gate operation. This
operator is manufactured with the highest Quality components
and is designed to accent any gate style. The G-5 is capable of
continuous cycles operation at 24V DC, converted directly from
an AC line. The battery back-up provides up to 400 cycles of
operation at 24V DC, converted directly from an AC line.
VIKING ACCESS
SWING GATES
Page 5
914-698-5083
GATE OPERATORS
WWW.POWERDOORPRODUCTS.COM
ULTRA REVOLUTION GATE OPERATOR
The Revolution automatic gate system runs off of a
Rechargeable 12V battery, which is trickle charged via
transformer connected to 110 volts or optional 10-watt solar
panel. With its solar power capabilities and 12V battery power
source, the revolution Gate is environmentally friendly, and can
work even in the event of power outage. All The power
components an remote sensors are hidden away in a compact,
weather-resistant control box. All of the gate opening systems
are UL-325 Compliant.