Specifications

Model “MG” operators are designed for use on sectional doors with high
lift or vertical lift and rolling service doors and grilles.
 High starting torque motor with full overload protection. Solid state
circuitry with power and program feedback LED’s. On board open/
close/stop buttons for service and adjustments. Terminals labeled and
grouped by function. Auto-detect monitored photo beam for
simplified installation. Selectable built in functions including: timer to
close, mid-stop, delay on reverse, lock bar sensing, maximum run
time, etc.
PowerMaster Model “H” operators are designed for use on Standard Lift
Sectional Doors and Rolling Service Doors and Grilles.
 High starting torque Motor with Full Overload Protection. Solid
State Circuitry with Power and Program Feedback LED’s. On Board
Open/Close/Stop buttons for service and adjustments. Terminals
labeled and grouped by function. Auto-Detect monitored photo beam
for Simplified Installation. Selectable operating modes B2, C2, D1,
E2, T, TS. Field adjustable built in functions including: timer to close,
mid-stop, delay on reverse, lock bar sensing, maximum run time, etc.
Model “J” operators are designed for use on standard lift sectional doors
and rolling service doors and grilles.
 High starting torque motor with full overload protection. Solid state
circuitry with power and program feedback LED’s. On board open/
close/stop buttons for service and adjustments. Terminals labeled and
grouped by function. Auto-detect monitored photo beam for
simplified installation. Selectable operating modes B2, C2, D1, E2, T,
TS. Field adjustable built in functions including: timer to close, mid-
stop, delay on reverse, lock bar sensing, maximum run time, etc.
DOOR OPERATORS
H BELT DRIVE HOIST
J BELT DRIVE JACKSHAFT
MG GEAR REDUCED HOIST
Page 13
RJ BELT DRIVE JACKSHAFT RELEASE
Model “RJ” operators are designed to allow emergency egress capability and
lock bar sensing on rolling service doors and grilles.
 High starting torque motor with full overload protection. Solid state
circuitry with power and program feedback LED’s. On Board open/close/
stop buttons for service and adjustments. Terminals labeled and grouped
by function. Auto-detect monitored photo beam for simplified
installation. Selectable operating modes B2, C2, D1, E2, T, TS. Field
adjustable built in functions: timer to close, mid-stop, delay on reverse,
lock bar sensing, maximum run time, etc.
DOOR OPERATORS
914-698-5083
POWERMASTER