Installation manual

VIKING TECHNICAL SUPPORT 1.800.908.0884

Operator Positioning

! IMPO RTANT: Swing Gates must not open into public access areas.

The gate must be installed in a location so that enough clearance is supplied between the

gate, while opening and closing, and adjacent structures to reduce the risk of entrapment.

GATE OPERATOR INSTALLATION

! TECHNICAL TIPS: Operator and Arm Geometry

•

Increasing “C” dimension provides better gate control and stability by reducing the

effects of inertia and deceasing the gate leverage against the operator.

•

Following to the geometrical formulas and relationships provided is recommended.

Arm Assembly: VA-F1ARM20