Specifications
VIKING
standard features
and operator specications
UL325 and UL991 Listed by Underwriter Laboratories (UL) • Accessible manual
emergency release • Fail-Safe option sets the gate to automatically transfer to a
fail-safe mode in the event of a power failure, allowing the gate to be pushed open
without the use of special knowledge of the equipment • Fail-Secure option sets
the gate to mechanically lock in the event of a power failure, allowing no manual
movement without the use of the manual release • Standard Auto Open feature •
Elegant design, appealing to any architectural project • Plated and powder coated
steel chassis • Opening up to 40' • Operation speed of one foot per second • 100%
duty cycle under very wide temperature range • Very low power consumption • 100
cycles of operation on backup battery (1000 lb. gate and 20' length) • Intelligent
speed control with smooth start and stop, self-adjust system • Modulated speed
regulator prevents exceeding operating speed that may reduce the service life of the
gate operator and/or installation • Intelligent obstruction detection with adjustable
sensitivity • Innovative ne tune adjustment for the end of gate travel (down to 1/8")
• Built-in protection against lightning strikes or similar electrical surges • Inherent
overload protection in the regulated power supply for external accessories
with multiple devices of protection • Modular connectors for
easy installation • Solar panel and low voltage wiring
compatibility • LED indicators for verication
of operation
Viking Access Systems
Phone 800.908.0884 Fax 949.753.1640
631 Wald Irvine, CA 92618
www.vikingaccess.com