Specifications

TECHNICAL SUPPORT 1 800 908 0884
17
LIMIT SWITCH SET-UPLIMIT SWITCH SET-UP
STEP 4
Press both limit switches at the same time to
initiate the set-up (the open and close LEDs
will blink on the Control Board).
STEP 5
Open and close the gate from limit to limit
without interruption for two complete cycles.
STEP 6
Use the Fine Tune Limit Pot to perform minor adjustments to the closed position.
Fully Open and Close
the Gate 2 Times
2X
Click!Click!
Click!Click!
Click!
Click!
Activate Both
Limit Switches
At the Same Time
6"
Initial Setting
First Adjustment
Second Adjustment
Fully Open and Close the Gate
After Every Adjustment
2-1/2"
1/2"