User's Manual

VIKING

standard features

and operator specications

Accessible manual releases • Fail-Safe option sets the gate to automatically transfer

to a fail-safe mode in the event of a power failure, allowing the gate to be pushed

open without the use of special knowledge of the equipment • Fail-Secure option

sets the gate to mechanically lock in the event of a power failure, allowing no manual

movement without the use of the manual release • Standard Auto Open feature •

Elegant design, appealing to any architectural project • Plated and powder coated

1/4" steel chassis • Opening up to 120° • Operation speed of 13 to 16 seconds per 90°

• 100% duty cycle under very wide temperature range • Very low power consumption

• 300 cycles of operation on backup battery (600 lb. gate and 12' length) • Intelligent

speed control with smooth start and stop, self-adjust system • Modulated speed

regulator prevents exceeding operating speed that may reduce the service life of the

gate operator and/or installation • Intelligent obstruction detection with adjustable

sensitivity • Overlap delay that holds one gate momentarily by an adjustable time

while the other gate is operating (Master/Slave installation with overlap gates) • Built-

in protection against lightning strikes or similar electrical surges • Inherent overload

protection in the regulated power supply for external accessories with multiple

devices of protection • Modular connectors for easy installation •

Solar panel and low voltage wiring compatibility • LED

indicators for verication of operation

Viking Access Systems

Phone 800.908.0884 Fax 949.753.1640

631 Wald Irvine, CA 92618