User's Manual

VIKING TECHNICAL SUPPORT 1.800.908.0884
21
LIMITS SETUP
To Readjust the Close Limit:
1. Clear the current limit setting by
holding down the “Close Limit” button
until the LED is flashing.
2. Repeat STEP 2 on page 20 to set the
limit.
3. Repeat STEP 4 on page 20 to relearn
the installed Positive Stop reference.
To Readjust the Open Limit:
1. Clear the current limit setting by
holding down the “Open Limit” button
until the LED is flashing.
2. Repeat STEP 3 on page 20 to set the
limit.
! IMPORTANT: If the gate has been manually released and re-engaged:
1. The Open Limit LED will be illuminated solid and the Close Limit LED will be flashing.
2. The gate will not run in the open direction until step 4 is repeated on page 20.
Open Limit
Close Limit