Instructions / Assembly

2x4 ELEVATED GARDEN PLANTER WITH VINYL LEGS AND SHELF

ASSEMBLY INSTRUCTIONS

ACTUAL SIZE: 45-1/2 in. L x 24 in. W x 31-3/4 in. H

PARTS LIST

ASSEMBLY

continued on next page

Long vinyl

ﬁller strips

(x4)

Short

vinyl ﬁller

strips (x8)

Screws

(x8)

Medium

vinyl ﬁller

strips (x8)

PAGE 1
2x4 ELEVATED GARDEN PLANTER WITH VINYL LEGS AND SHELF ASSEMBLY INSTRUCTIONS ACTUAL SIZE: 45-1/2 in. L x 24 in. W x 31-3/4 in.
PAGE 2
x4 ELEVATED GARDEN PLANTER WITH VINYL LEGS AND SHELF ASSEMBLY INSTRUCTIONS ASSEMBLY – continued 2 Slide boards with cleats into the legs as shown to create shelf base. Tip: Use a rubber mallet to gently tap in boards if needed. E F E A F A 3 Snap medium filler strips into legs and adjust so they are resting on top of the boards from Step 2.
PAGE 3
2x4 ELEVATED GARDEN PLANTER WITH VINYL LEGS AND SHELF ASSEMBLY INSTRUCTIONS ASSEMBLY – continued 4 Slide remaining boards with cleats into legs as shown to create planter bed base. E F E F 5 Slide side and end boards into legs as shown.
PAGE 4
2x4 ELEVATED GARDEN PLANTER WITH VINYL LEGS AND SHELF ASSEMBLY INSTRUCTIONS ASSEMBLY – continued 6 Place bottom boards on cleats to create the planter bed floor and shelf. Note: Boards will have small gaps in between them to allow for drainage. I J I I J I 7 Slide post caps onto legs to complete the planter. K TIPS: • Place planter on a level surface. • Lay down landscape fabric (optional) prior to filling with soil. • When adding soil, place it evenly across the bed.