User manual

GB
USA
3. Spare Parts
• Only use the manufacturer’s original spare parts.
• Unsuitable or defective spare parts may cause damage,
malfunction or total failure of the tool.
• The use of unapproved spare parts will void all warranty,
service and liability claims as well as all claims for compen-
sation against the manufacturer or its agents, distributors
and sales representatives.
4. Disposal
• For disposal, clean tool and disassemble it according to the
regulations for work safety and environmental protection.
• Components can be recycled.
5. Appropriate Use
• For metal tubes and pipes ? 4.75 – 6 mm with a wall thick-
ness of 0.7 – 1.0 mm.
• For open (F) or double (E) fl ares according to DIN or SAE, for
normal 90°- and 180°-fl ares.
• For fl ares on rolled and drawn tubes.
6. Included
11 pieces in sheet steel box
7. Components of the Tool
1 Tube Flaring Unit
2 Quick-change holder
3 Hydraulic Spindle
4 Gripping Jaws 4.75 mm
5 Gripping Jaws 5 mm
6 Gripping Jaws 6 mm
7 Thrust Block ? 4.75 mm SAE / DIN
8 Thrust Block ? 5 mm SAE / DIN
9 Thrust Block ? 6 mm SAE
0 Thrust Block ? 6 mm DIN
q 90°-Thrust Block 4.75 ⵒ 6 mm SAE 90°
8. Technical Data
• With replaceable gripping jaws
• Hydraulic Spindle
• Tube fl aring unit with quick-change holder
Operating Instructions
Tube Flaring Tool Set
for multiple applications
with replaceable gripping jaws
V1728
Dear Customer,
You have made a good choice. This VIGOR tool in front of you
is a high-quality product that will make your work easier.
1. For Your Safety
Before using this tool set for the fi rst time please make
sure to carefully read these operating instructions and
fully understand all information given.
For effective use of the tool set as intended, it is essential that
all safety and other information in these operating instructions
is adhered to.
VIGOR will not be liable for any injuries to persons or damage
to property originating from improper application, misuse of
the tool or a disregard of the safety instructions. Any personal
injury or material losses caused by improper use of the tool set
are the sole responsibility of the owner.
2. Explanation of Symbols
ATTENTION: Please pay attention to these symbols!
READ THE OPERATING INSTRUCTIONS!
The owner of this tool is obliged to observe the operating
instructions and should ensure all users of this tool use it
according to the information given in this manual.
NOTICE!
This symbol marks advice which is helpful when using
the tool.
CAUTION!
This symbol marks important specifi cations, dangerous
conditions, safety risks and safety advice.
ATTENTION!
This symbol marks advice which if disregarded results in
damage, malfunction and/or functional failure of the tool.
1
2
3
4 - 6
7 - 0
q