Installation Guide

MODEL VG06063
16
F. INSTALLING THE SIDE PANEL SUPPORTS
F1
1. Install the support assembly (#3) onto the
side glass panel (#4) approximately
two-thirds away from the wall. Use hex key
to tighten to screws.
2. Install the support assembly to the structural
arm (#2) and wall connector (#1). Make
sure it's level. Mark the holes on the wall
for the mounting screws for the wall
connector.
WALL
SIDE PANEL
OUTSIDE OF
THE CABIN
INSIDE VIEW
WALL
3
F2
SIDE PANEL
WALL
3
2
1
LEVEL