Technical information

V1.0 Vig625M Motherboard Manual

 S/PDIF-Out Connector: JSPD1

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s).

Connect the S/PDIF Out module cable to this connector, and then install the module to a

slot opening at the back of the system chassis.

Figure 14: S/PDIF-Out Connector

 CD-In Connector: CD_IN1

This connector is provided for external audio input.

Figure 15: CD-In Connector

 Front USB Connector: JUSB1~2

These connectors are for USB2.0 ports. These USB connectors comply with USB 2.0

specification that supports up to 480 Mbps connection speed. They are also compliant

with Intel I/O connectivity design guide.

Figure 16: Front USB Connector

NOTE:

The pins of VCC and GND must be connected correctly to avoid possible damage