System information

Vig580s Motherboard Manual
69
APM Configuration Sub-menu
Figure 53: APM Configuration Sub-menu
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss. When
set to Power On, the system goes on after an AC power loss. When set to Last
State, the system goes into either off or on state, whatever the system state was
before the AC power loss. Configuration options:
[Power Off] [Power On] [Last State]
Power On By Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is set
to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and
RTC Alarm Second appear with set values. Configuration options:
[Disabled] [Enabled]
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Configuration options:
[Disabled] [Enabled]
Note: The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first try.
Turning an external modem off and then back on while the computer is off causes an
initialisation string that turns the system power on.