System information

Vig580s Motherboard Manual
57
IDE Configuration Sub-menu
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you want to
configure the item.
Figure 44: IDE Configuration Sub-menu
Onboard IDE Operate Mode [Enhanced Mode]
Allows selection of the IDE operation mode depending on the operating system (OS)
that you installed. Set to Enhanced Mode if you are using native OS, such as
Windows® 2000/XP. Configuration options:
[Disabled] [Compatible Mode] [Enhanced Mode]
Enhanced Mode Support On [S-ATA Mode]
The default setting SATA allows you to use native OS on Serial ATA and Parallel
ATA ports. We recommend that you do not change the default setting for better OS
compatibility. In this setting, you may use legacy OS on the Parallel ATA ports only if
you did not install any Serial ATA device.
The P-ATA+S-ATA and P-ATA options are for advanced users only. If you set to any
of these options and encounter problems, revert to the default setting SATA.
Configuration options:
[S-ATA+P-ATA] [SATA mode] [P-ATA]
IDE Detect Time Out [35]
Selects the time out value for detecting ATA/ATAPI devices. Configuration options:
[0] [5] [10] [15] [20] [25] [30] [35]