System information

Vig580s Motherboard Manual

Primary, Third and Fourth IDE Master/Slave Sub-menu

While entering Setup, the BIOS automatically detects the presence of IDE devices.

There is a separate sub-menu for each IDE device. Select a device item then press

<Enter> to display the IDE device information.

Figure 43: Primary, Third and Forth IDE Master/Slave Sub-menu

The BIOS automatically detects the values opposite the dimmed items (Device,

Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and

SMART monitoring). These values are not user-configurable. These items show N/A

if no IDE device is installed in the system.

Type [Auto]

Selects the type of IDE drive. Setting to Auto allows automatic selection of the

appropriate IDE device type. Select CDROM if you are specifically configuring a CD-

ROM drive. Select ARMD (ATAPI Removable Media Device) if your device is either

a ZIP, LS-120, or MO drive. Configuration options:

[Not Installed] [Auto] [CDROM] [ARMD]

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to Auto enables the LBA mode if the

device supports this mode, and if the device was not previously formatted with LBA

mode disabled. Configuration options:

[Disabled] [Auto]