System information

Vig580s Motherboard Manual

Figure 10: CPU, Power and Chassis Fan Connector

Note: Make sure that your Fan Power (FANPWR1) jumper setting is correct.

USB Connectors (10-1 pin USB5/6 & USB7/8)

These connectors are for USB 2.0 ports. Connect the USB/GAME module cable to

any of these connectors, and then install the module to a slot opening at the back of

the system chassis. These USB connectors comply with USB 2.0 specification that

supports up to 480 Mbps connection speed.

Figure 11: USB Connectors