System information

Vig566s Motherboard Manual

Motherboard Jumper Settings

Figure 4: Motherboard Jumper Settings

Table 3: Clear CMOS Jumper Settings (CLRTC1)

Function

Jumper Configuration

Default 1-2 The BIOS uses current configuration information and passwords for

booting.

Clear

CMOS

2-3 Turn off the system and unplug the power cord. Move the jumper from

pins 1-2 (default) to pins 2-3 for about 5~10 seconds. Then move the

jumper back to pins 1-2.

Note: Except when clearing the rtc ram, never remove the jumper on CLRTC1

default position. Removing the jumper will cause system boot failures.

Table 4: BIOS Write Protection

Function

Jumper (JP3)

Configuration

Write Protect

Enabled

(default)

2-3 Protects the BIOS from being written to.

Write Protect

Disabled

1-2 Turn off the system and unplug the power cord. Move the jumper

from pins 1-2 (default) to ins 2-3. Reboot the system.