User guide

EQ100 Motherboard User Guide V2.0
54
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.
Configuration options: [Disabled] [Enabled]
Security
The Security menu items allow you to change the system security settings. Select
an item then press <Enter> to display the configuration options.
Figure 44: Boot Device Priority Configuration Screen
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor Password
item on top of the screen shows the default Not Installed. After you set a password,
this item shows Installed.
To set a Supervisor Password:
1. Select the Change Supervisor Password item and press <Enter>.
2. From the password box, type a password composed of less than six letters
and/or numbers then press <Enter>.
3. Confirm the password when prompted.
The message “Password Installed” appears after you successfully set your
password.
To change the supervisor password, follow the same steps as in setting a user
password.
To clear the supervisor password, select the Change Supervisor Password then
press <Enter>. The message “Password Uninstalled” appears.
NOTE: If you forget your BIOS password, you can clear it by erasing the CMOS
Real Time Clock (RTC) RAM.
After you have set a supervisor password, the other items appear to allow you to
change other security settings.