User guide

EQ100 Motherboard User Guide V2.0
49
Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to
be used for system suspend. Setting this item to [Auto] allows the OS to select the
ACPI state. Configuration options: [S1 (POS) Only] [S3 Only] [Auto]
Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
Configuration options: [No] [Yes]
ACPI 2.0 Support [ACPI v1.0]
Allows you to add more tables for Advanced Configuration and Power Interface
(ACPI) 2.0 specifications. Configuration options: [ACPI v1.0] [ACPI v2.0] [ACPI v3.0]
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When set
to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
APM Configuration
Figure 39: APM Configuration Screen
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss. When
set to Power On, the system goes on after an AC power loss. When set to Last
State, the system goes into either off or on state, whatever the system state was
before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event.
Configuration options: [Disabled] [Enabled]