User guide

EQ100 Motherboard User Guide V2.0
46
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-Directional] [EPP] [ECP]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode is set to [ECP]. This item
allows you to set the Parallel Port ECP DMA channel.
Configuration options: [DMA0] [DMA1] [DMA3]
EPP Version [1.9]
Appears only when the Parallel Port Mode is set to [EPP]. Allows you to select
the parallel port EPP version. Configuration options: [1.9] [1.7]
Parallel Port IRQ [IRQ7]
Allows you to select the parallel port IRQ.
Configuration options: [IRQ5] [IRQ7]
Onboard Game/MIDI Port [Disabled]
Allows you to select the Game/MIDI port address or to disable the port.
Configuration options: [Disabled] [200/300] [200/330] [208/300] [208/330]
Onboard 1394 Controller [Enabled]
Allows you to enable or disable the onboard IEEE 1394a controller.
Configuration options: [Enabled] [Disabled]
PCI PnP
The PCI PnP menu items allow you to change the advanced settings for PCI/PnP
devices. The menu includes setting IRQ and DMA channel resources for either
PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA
devices.
Figure 36: PCI PnP Configuration Screen