User guide

EQ100 Motherboard User Guide V2.0
45
Audio Controller [Auto]
Allows you to disable the onboard audio controller, or lets the BIOS automatically
configure. Configuration options: [Auto] [Disabled]
Front Panel Support Type [AC97]
Allows you to set the front panel audio connector (AAP) mode to legacy AC97
or High Definition Audio depending on the front panel audio module support.
Configuration options: [AC97] [HD Audio]
PCIE Port 0 [Auto]
Configuration options: [Auto] [Enabled] [Disabled]
Onboard Devices Configuration
Figure 35: Onboard Devices Configuration Screen
Onboard JMB363 Serial -ATA [DISABLED]
Allows you to disable or choose the function of the onboard JMB363 Serial ATA
controller. Configuration options: [Disabled] [RAID] [IDE]
Onboard PCIEX GbE LAN [Enabled]
Allows you to enable or disable the onboard PCI Express Gigabit LAN controller.
Configuration options: [Enabled] [Disabled]
LAN Option ROM [Disabled]
This item allows you to enable or disable the PCI Express Gigabit LAN boot
ROM configuration. This item appears only when the Onboard PCIEX GbE
LAN item is set to [Enabled]. Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]