User guide

EQ100 Motherboard User Guide V2.0
44
Boot Graphic Adapter Priority [PEG/PCI]
Allows selection of the graphics controller to use as primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
Allows you to disable the internal graphics device (IGD) or select the amount of
system memory pre-allocated by the IGD.
Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
Graphic Memory Type [Auto]
Allows you to select the graphic memory type that the system will support.
Configuration options: [Auto] [DVMT] [FIX] [DVMT+FIX]
PEG Port [Auto]
Allows you to set to Auto or disable the PCI Express Graphics port.
Configuration options: [Auto] [Disabled]
PEG Force x1 [Disabled]
Allows you to set to enable or disable the PEG force x1.
Configuration options: [Enabled] [Disabled]
Video Display Devices [Auto]
Allows you to select the video display device to use.
Configuration options: [Auto] [CRT only] [TV only]
TV Standard [Video BIOS default]
Allows you to select the TV standard in your area.
Configuration options: [Video BIOS default] [NTSC] [PAL]
South Bridge Configuration
Figure 34: South Bridge Configuration Screen.