User manual

Viglen BX130 – VIG385P User Manual

This item allows the user to select the Boot Priority of Hard Disk Devices.

First Boot Device

This item allows the user to set the first boot-up device. The options are

"Floppy", "LS120", "HDD", "CDROM", "ZIP100", "USB-FDD", "USB-ZIP",

"USBCDROM", "USB-HDD", "LAN" and "Disabled".

Second Boot Device

This item allows the user to set the second boot-up device. The options are

"Floppy", "LS120", "HDD", "CDROM", "ZIP100", "USB-FDD", "USB-ZIP", "USB-

CDROM", "USB-HDD", "LAN" and "Disabled".

Third Boot Device

This item allows the user to set the third boot-up device. The options are

"Floppy", "LS120", "HDD", "SCSI", "CDROM", "ZIP100", "USB-FDD", "USBZIP",

"USB-CDROM", "USB-HDD", "LAN" and "Disabled".

Boot Other Device

If enabled, this option enables the BIOS to load the OS from another device rather

than the ones that have been specified as the first, second and third boot up devices.

The settings are "Enabled" and "Disabled".

Exit

Choose Exit from the Award BIOS main menu with the Left/Right arrow keys. You

should see the following display:

Figure 18: Save & Exit Setup

Save & Exit Setup

When the item "Save & Exit Setup" is highlighted, press <Enter> to save the

changes you've made in the BIOS program (CMOS) and exit. Your system should,

then, continue with the boot-up procedure.

Exit without Saving