User manual

Viglen BX130 – VIG385P User Manual
5
Chapter 1: System Overview
Introduction
This manual describes the chassis and Motherboard level features of the Viglen
BX130. This pedestal system consists of a medium tower chassis and a 775-pin Intel
Pentium 4 D processor supported Motherboard.
Table 1: Motherboard Features
Features Description
Microprocessor Pentium 4 – LGS775
Chipset Intel 945G
Memory Capacity 4GB Maximum
PCI Bus
? 4 x 32 BIT PCI
? PCI-e x16 VGA Only
? PCI-e x8 VGA Only
ISA Bus
? PS2 Keyboard and Mouse
? Floppy Drive
IDE
? Single EIDE port supports Ultra DMA 100MB/s of Burst data
transfer rate, supports UDMA Mode 5, PIO Mode 4 and ATA/100
SATA Supports up to Four SATA hard drives. (Non RAID)
LAN Support Integrated Intel 82573V GB LAN Controller
Chassis 522mm (height) x 205mm (width) x 473mm (depth)
Weight 11.5 kg without PSU
Power Supply Single 350W power supply
Cooling Two Chassis mounted 120 mm Rear and 80 mm Front fans
Hard disk bay Support for four hard drives
Other External Drive Bays Two standard 3.5” diskette drive bays (one occupied)
Four 5 1/4” Drive bays (one occupied)