User manual

Viglen BX130 – VIG385P User Manual
13
Dimensions
? ATX, 11.5" x 9.5" (292 x 242 mm)
Microprocessor
The Motherboard supports a single 775-pin Pentium 4 processor of up to 3.8GHz. In
addition, the front side bus speed is automatically selected. The Motherboard
currently supports processors that run internally up to 3.8GHz and have a
512Kb/1MB second-level cache running at full CPU Speed.
Microprocessor Packaging
The Intel Pentium processor connects to the Motherboard through a LGA775
connector.
Processor Upgrades
The Motherboard can be upgraded with an Intel Pentium processor that runs at
higher speeds.
Main Memory
The VIG385P supports unbuffered, non-ECC single or dual channel DDRII with the
bandwidth up to 5.3GB/s (DDRII 667) for single channel mode and 10.7 GB/s (DDRII
667) in dual-channel Interleaved mode.
The Motherboard supports the following memory features:
? 240-pin DIMMs
? DDRII-400/533/667
? Up to a maximum of 4GB of ram
? Non-ECC un-buffered DDRII memory.
DDRII Memory
Double Data Rate (DDRII) SDRAM is an established, high-bandwidth DRAM
technology that is cost-effective and suitable for every PC market segment. This
Motherboard only accepts DDR memory modules which are keyed so not to confuse
it with any other type of memory.
ECC Memory
Error checking and correcting (ECC) memory detects multiple-bit errors and corrects
single-bit errors. ECC memory must be installed for the system to function correctly.