Instruction manual

H-POSITION ： Moves image
horizontally on screen either left (<) or
right (＞).
V-POSITION ：Moves images
vertically on screen either up (<) or
down (＞).
CLOCK：If the clock setting of your
image is not fine-tuned, you may
observe periodic vertical bars of video
noise on your image. These bars of
noise are usually adjusted out when
an Auto Configuration is performed. If
the bars of noise are still present, this
setting can be adjust manually.
PHASE：If the phase of your monitor
is not fine-tuned, you may observe
unstable horizontal
MULITI WINDOW:
OFF.PIP. POP
The default value is off, Lets you
select your window for the picture:
PIP . POP
2. OSD setup under AV1/AV2/S-VIDEO /HDMI input mode
PICTURE
Remark
Brightness: Adjusts the brightness of
the picture.
Contrast Adjusts the difference
between the light and dark areas of
the picture.
HUE:-50 to +50
Saturation:0~100
Sharpness:0~100
Color temp: press“ >”buttom
Change the color intensity of the
temperature Selected (Normal. warm.
cool.s-RGB. user)
Scale: normal. center
Picture mode: standard .dynamic.
soft. user
3D NR: Reduces picture “static” or
any type of interference. This feature
is especially useful for providing a
clearer picture in weak analog signal
conditions. Press the right arrow to
choose between: Off for no noise
reduction; Low for a softer, smoother
picture that retains picture sharpness
and detail; Medium for a slightly softer
picture than the Low setting; High for
an even softer, smoother picture than
the other settings (the picture detail is
somewhat decreased).
MPEG NR: Mpeg noise reduce( OFF.
low . high)
14
15
14
15