Weight capacity: 20 kgs ( 44 Lbs) / Shelf RAN AR 11 TY 30 30 W V827 YEAR Page 1/11
1 8 2 10 8 10 4 12 5 7 6 12 3 8 11 11 9 IMPORTANT: 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping.
HARDWARE LIST 8 Bolt 6 x 12 H 1 Screw 4 x 15 14 Bolt 6 x 35 I 1 Plastic drawstring 2 Allen key J 2 Bracket 13x28x1 12 Screw 4 x 28 K 3 Cam lock E 2 Screw 5 x 30 L 3 Cam bolt F 1 Wall anchor M 24 Screw 4 x 12 G 1 Screw 4 x 40 Screwdriver required for assembly ( Not included ) GENERAL ASSEMBLY GUILINES 1. Ensure all parts & hardware are availabel before begining assembly 2. Follow each step carefully to ensure the proper assembly of this product 3.
STEP 1 Connect shevles (1) (2) with metal suppporting bar (8) by Screw (D) 80% tighten all screw (D) by screwdriver 8 D D 1 D D D 8 D D D 2 D Page 4/11
STEP 2 Insert Cam Bolt (L) to available holes on panel (4) by Screwdriver L L L 4 L K 6 STEP 3 Insert Cam lock (K) to availabel hole on (6) , (7) Connect (6) , (7 ) with part from step (2) 80% tighten cam lock by screwdriver K 6 K 7 K 4 M STEP 4 Connect (5) with part from step (3) by screw (M) 80% tighten screw (M) by screwdriver M M M M M M M M M 5 M Page 5/11
STEP 5 Connect part (3) with part from step 4 by screw (M) 80% tighten screw (M) by screwdriver M M 3 M M M M STEP 6 Connect part from step (5) with metal supporting bar (8) by screw (D) 80% tighten screw (D) by screwdriver D D D D 8 D Page 6/11
STEP 7 Connect lower leg frame (11) with (12) by bolt (A) 80% tighten Bolt (A) by Allen key ( C) C A 12 C A 11 STEP 8 Connect part from Step 7 with upper leg frame (13) by Bolts (A) 80% tighten Bolts (A) by allen key (C) 13 A C C A Page 7/11
STEP 9 Connect part from Step 8 with shelves by Bolts (B) & Screw (E) 80% tighten Bolts (B) & screw (E) by allen key (C) B B B B E B Bx7 B B E x1 B B B Bx7 B E B Ex1 B B Page 8/11
STEP 11 Measure height for bracket in desired location Drill hole using 6mm size bit Insert wall anchor (F) into wall at desired location.
STEP 10 Connect part from step 9 with metal bracket (J) by Screw (H) 80% tighten screw (H) by screwdrriver J H 100% tighten all bolts & screw.
FINISH ! Page 11/11
