Weight capacity: - Cabinet: 40 kgs/ 88 Lbs - Shelf: 20 kgs/ 44 Lbs RAN AR 11 TY 30 30 W V826 YEAR Page 1/13
1 12 13 13 2 12 3 15 12 15 4 8 7 6 14 9 14 5 12 11 10 IMPORTANT: 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping.
HARDWARE LIST 8 Bolt 6 x 12 I 1 Plastic drawstring 16 Bolt 6 x 35 J 2 Bracket 13x28x1 2 Allen key K 11 Cam lock 16 Screw 4 x 28 L 11 Cam bolt E 4 Screw 5 x 30 M 2 Screw 3 x 17 F 1 Wall anchor N 24 Screw 4 x 12 G 1 Screw 4 x 40 O 2 Plastic Wedge H 1 Screw 4 x 15 P 4 Hinge Some extra hardware may also have been included GENERAL ASSEMBLY GUILINES 1. Ensure all parts & hardware are availabel before begining assembly 2.
STEP 1 Connect shevles (1) (2) (3) with metal suppporting bar (12) by Screw (A), 80% tighten all screw (A) by screwdriver (F) 12 D 12 D 1 D D D D 12 12 D 2 D D D 12 12 D 3 D D Page 4/13
STEP 2 Insert Cam Bolt (L) to available holes on top panel (4) , side panel (6) & (7) by Screwdriver L 4 L L L L L 5 L 6 L L 7 Page 5/13
STEP 3 Insert Cam lock (K) to availabel hole on supporting bar (8) Connect (6) , (7 ) with supporting bar (8) by Cam lock (K) 80% tighten cam lock by screwdriver K 8 K STEP 4 Connect part from step with top panel (4) by Cam lock (K) Insert Cam lock (K) to availabel hole on (6) , (7) & (8) 80% tighten cam lock by screwdriver K 4 K 6 K K 8 K 7 K Page 6/13
STEP 5 Connect part from Step 4 with back panel (9) 9 STEP 6 Connect part from Step 5 with Bottom panel (10) Insert Cam lock (K) to availabel hole on (6) , (7) 80% tighten cam lock by screwdriver K 10 Page 7/13
STEP 7 Connect lower leg frame (14) with (15) by bolt (A) 80% tighten Bolt (A) by Allen key ( C) 15 C A C A 14 STEP 8 Connect part from Step 7 with upper leg frame (13) by Bolts (A) 80% tighten Bolts (A) by allen key (C) 13 A C C A Page 8/13
STEP 9 Connect part from step 8 with parts from step 1 & step 6 by bolt (B) & Screw (E) 80% tighten bolts (B) screw (E) by allen key (C) B E B B E B Ex2 B B B Bx8 B B B B B B E St ep 14 B Bx8 B E Ex2 B Page 9/13
STEP 10 Connect doors (10) , (11) with hinge (P) by screw (N) 80% tighten screw (N) by screwdriver N N N 10 STEP 11 Connect part from step 10 with part from step 9 Connect door with cabinet by screw (N) 80% tighten screw (N) by screwdriver N 10 Page 10/13
STEP 12 Connect part from step 11 with metal bracket (J) & Plastic wedge (O) Screw (H) & (M) 80% tighten screws (H) & (M) by screwdriver J H O M O 100% tighten all bolts & screw.
STEP 13 Measure height for bracket in desired location Drill hole using 6mm size bit Insert wall anchor (E) into wall at desired location.
FINISH ! Page 13/13
