User Manual

Table Of Contents

7User Manual Visit the ViewZ USA website at https://www.viewzusa.com

WIRING

WIRING (DC 24V input only)

1. On the back of the monitor, loosen the thumb screws and lower the access panel.

2. Aach the leads from the power supply (supplied) to the le and right connectors.

3. When nished, secure the access panel.

Table A shows the recommended maximum wiring distances (transformer to load), and are calculated with a

10-percent voltage drop.

VZ-DC24-320 ( Power Transformer) Test ResultInput : Power Source output terminal / Output : Set input terminal

DC 24V

tested

tested tested tested

tested

Not Recommended

DC 27V

Max. V

tested

tested tested testedtested tested tested

tested tested tested

tested

Cable Type - 18AWG (Current : 12~19 A)

1 Set of IP-PVM-N

2 Set of IP-PVM-N

3 Set of IP-PVM-N

ft / meter

100 ft / 30.48 m

150 ft / 45.72 m

250 ft / 76.20 m

300 ft / 91.44 m

200 ft / 60.96 m

350 ft / 106.68 m

23” IP-PVM-N - 3 MONITORS - VZ-PVM-I2B3N & I2W3N

27” IP-PVM-N - 3 MONITORS - VZ-PVM-I3B3N & I3W3N

32” IP-PVM-N - 3 MONITORS - VZ-PVM-I4B3N & I4W3N

WARNING: Do not connect a ground to the center post. Please be careful of voltage polarity.