VZ-CM308 Telescopic Ceiling Mount with length, rotation and tilt adjust VZ-CM308 series INSTALLATION INSTRUCTIONS VZ-CM308-B (for Black Color) VZ-CM308-W (for White Color) VZ-CM-EB (Optional Extension Pole set for Black Color) VZ-CM-EW (Optional Extension Pole set for White Color)
CM 308 series Contents Weight Limit ......................................................................................................................................................................................................... Warning Statements ............................................................................................................................................................................................ Ceiling Mount info................................................
CM 308 series Telescopic Ceiling Mount Info This bracket is designed to mount a monitor from the ceiling structure. It can be used with the existing truss structure of the building or in conjunction with a channel strut. There are four lengths of brackets available. • Part # VZ-CM308-B Length of 3' to 8' • Part # VZ-CM308-W Length of 3' to 8' • Part # VZ-CM-EW Length of 3' to 5.2' Optional Extension Pole Set • Part # VZ-CM-EB Length of 3' to 5.
CM 308 series Assembly Components (cont’d) M4 x L15 mm Screw (Qty 4) M5 x L15 mm Screw (Qty 4) H M6 x L15 mm Screw (Qty 4) I φ 16 x φ 6.2 x 1.5 Washers (Qty 4) J M6 x L12 mm Screw (Qty 4) φ 44 x φ 38.5 x 2.0 Washers (Qty 1) M6 x L10 mm Lock Screw (Qty 2) M12 x L100 x φ 17 (Qty 1) φ 20 x φ 12.5 x 2.0 Washers (Qty 2) 4 G K L M U M8 x L55 x φ 10 (Qty 2) - 8.8 grade φ 16 x φ 8.2 x 1.5 Washers (Qty 4) M8 x L50 x φ 10 (Qty 4) - 8.
CM 308 series Features F E D E 18 ft (Max) ~ 3.08 ft / 37.0” / 940 mm (Min) E D 13 ft (Max) ~ 3.08 ft / 37.0” / 940 mm (Min) D 8.03 ft / 96.45” / 2450 mm (Max) ~ 3.08 ft / 37.0” / 940 mm (Min) Extension Pole Configuration / Tilt, Swivel D E D Tilting 0-90° E PAN Rotation 360° 8 ft (Basic) F 13 ft (Optional) D E F 18 ft (Optional) Tilting -5° ~ +45° Tilting ± 5° Installation Instructions Visit the ViewZ USA website at http://www.viewzusa.
CM 308 series Installation U Screws Securing Mount to Building 1) Mount Wall/Ceiling mount bracket (B) with screw & washers (U) 2) Tighten the M12 (V) lock nut using a open-wrench U Washers V Lock Nut B Wall/Ceiling Mount Bracket 3) Insert screw to Wall/Ceiling mount bracket with wahsers when you setup the position of top pole. 4) You can adjust pole angle between 0⁰ and 90⁰. 5) Tighten the M8 lock nut using a open-wrench.
CM 308 series Installation Leveling the Pole (Top & Middle) 1) You can ensure the pole is properly aligned by tightening the lock screws/nuts between top & middle, middle & bottom poles. 2) Place a level on poles(top & bottom) and tighten the screws/nuts (see illustration on the right). 3) Check and adjust 2 adjacent sides of the pole until it is plumb in each direction.
CM 308 series Installation E Middle Pole Leveling Pole (Bottom & Middle) 1) You can ensure the pole is properly aligned by tightening the lock screws/nuts between middle & bottom poles. 2) Place a level on poles (middle & bottom) and tighten the screws/nuts (see illustration on the right). 3) Check and adjust 2 adjacent sides of the pole until it is plumb in each direction.
CM 308 series Installation Direct Installation 1) Applicable VESA pattern - 50 x 50, 75 x 75, 100 x 100, 200 x 100 If your monitor supports a VESA plate already mounted on the back, simply ensure the four M4/M5/M6 screws are in place and tightened. If the mount is not already attached, connect it using the supplied M4/M5/M6 VESA screws (4-places). G, H, I Screws Caution: Some installations may require running power and video cables prior to attaching the monitor bracket to the pole.
CM 308 series Warranty ViewZ USA LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long ViewZ USA warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What ViewZ USA Will Do At the sole option of ViewZ USA, ViewZ USA will repair or replace any product or product part that is defective.
