INSTALLATION MANUAL Flat Panel Ceiling Mount Accessory 200x200/300x300 400x200/400x400 600x400/800x400 ISSUED: MAR.
NOTE: Read the entire instruction manual before you start installation and assembly. Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement. WARNING • Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet.
1. Installing the Adapter Brackets 1-2 For Recessed Back Screens or to Access A/V Inputs TV TV TV Top of the Display M-C M-F M-G M-C M-D M-E M-F M-D M-E M-F M-G M-G M-H M-D M-E M-F M-G M-H Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen. · Position the adapter brackets as close as possible to the center of the display. · Screw the adapter brackets onto the display. 1-1 For Flat Back Screens Tighten all screws but do not over tighten.
3. Hooking the Display onto the Wall Mount 4. Adjustment +5° -12° Tighten the bottom bolts to secure the adapter brackets to the universal plate. C +5° -5° Adjust the display to the desired angle. Maintenance • Check that the bracket is secure and safe to use at regular intervals(at least every three months). • Please contact your distributor if you have any questions. Install both antiskid blocks as close to the adapter brackets as possible.
