Instruction manual

55
Advanced Recording
Alarm Schedule
Sets the Alarm Recording for each channel
(by hour). Select single or multiple time
blocks:
• Mouse Control: Click a single block to
open the Recording Type Menu. Click
and Drag a block of times to turn Alarm
Recording ON or OFF.
• Remote Control & Front Panel:
Navigate to the Channel Block section,
and the entire block will be highlighted
with a White outline:
z Press the ENTER button to access the
Time Blocks - the first hour on Channel 1
will be highlighted in Yellow.
z Navigate to the desired time block, and
press the ENTER button to activate the
block - if a single block is desired, press
ENTER a second time.
z To select multiple blocks, use the arrows
to drag the cursor until the desired time
blocks are selected and press the
ENTER key.
z Alarm Recording will be turned ON or
OFF.
Once the settings have been adjusted for
the hour(s), the changed time block(s) will
be shown based on the legend:
Legend:
• None
• Alarm
Saving the Settings
You will be prompted to save the settings
when exiting a window (when changes have
been made)
Click on OK to save the settings, or
CANCEL to exit without saving.