Instruction manual

33
Display Menu
6. Press the SEQUENCE button on the
Remote or Mouse Menu to switch to
Sequence display.
5. Press the RETURN button when
complete. and select SAVE & EXIT.
1. Double Left Click on the Green
Highlighted box. The Highlight will change
to YELLOW - Setup Mode is now active.
SEQUENCE SETUP - MOUSE
2. Select the Display Mode by single left
clicking to switch (5 different Display Options
- Single, Quad, 6-split, 8-split & 8-quad).
3. Click the Right Mouse Button to assign
channels using a drop down menu (all
squares must have an assigned number).
Click anywhere outside the squares to exit.
4. Repeat for the next Display Modes (up to
16 additions).