Instruction manual

WIRING (only 24V~ inputs)
1. On the back of the monitor, loosen the thumb screws and lower the access panel.
2. Attach the leads from the power supply (supplied) to the left and right connectors.
WARNING: Do not connect a ground to the center post.
Please be careful of voltage polarity.
3. When finished, secure the access panel.
Table A shows the recommended maximum wiring distances (transformer to load),
and are calculated with a 10-percent voltage drop.
Recommended Wiring Distances
Inch
Wire
18AWG
16AWG
14AWG
23”
150 ft
(45 m)
240 ft
(73 m)
300 ft
(91 m)
27”
60 ft
(18 m)
120 ft
(36 m)
150 ft
(45 m)
32”
30 ft
(9 m)
30 ft
(9m)
90 ft
(27 m)
- 6 -