User`s manual

2. Click the More Settings tab; this will take you to the More Settings menu, shown in Figure 2.

Figure 2. More Settings Menu

3. Configure settings, including:

• Device Name: Name to use for DVR.

• Device No.: Device number to use for DVR.

• CVBS Output Brightness: Video output brightness.

• Transparency: Menu transparency.

• Operation Timeout: Set timeout time for menu inactivity. For example, if timeout time was set to

5 minutes, after 5 minutes of inactivity in the General Settings menu, you’ll be returned to the

Live Preview.

• Main CVBS Scaling: Enable/disable video output scaling for main video output.

Configuring RS-232 Port Settings

To configure RS-232 devices to be used with the DVR:

1. Enter the RS-232 Settings menu, shown in by clicking Menu > Setting > RS232.