Instruction manual

E. Monitor Control
1) TCP/IP MODE
- Please select “TCP/IP”
- Click the “IP Installer”
- Click the “Update” in IP Installer window
- Find Monitor(s) and if you click the “Model Search” button,
it shows Model ID in the list
- If you click the “Start” button, you can reach the CMS menu .
- Please tick the control Model list(s)
- If you click the “READ” button, it will take monitor
Information checked in IP Installer window.
- And then, you can select the “Model ID” you checked in IP
Installer window.
- Now you can control each button in each Tab in order to
control the monitor(s)
- If you select ”ALL” in the model ID tab, you can control
Monitor(s) without Monitor’s ID number.
2) SERIAL MODE(Option)
- Setting: Com Port: Can be set up from Com1 to Com6.
Baud rate: Can be set up from 600 to 25600.
Data bit: Can be set up from 5 to 8 bit.
Parity bit: Can be set up as None, Odd, Even, Mark
or Space.
Stop bit: Can be set up as 1, 1.5 or 2bit.
Flow control: Can be set up as None,
- The way of control is similar to TCP/IP mode.
e.g.) In this case, you can control the “Model ID No. 0” monitor.
Defalt is “ALL”
※ For the detail explanation, refer to the enclosed “Monitor Control” CD.