Instruction manual

B. REMOTE CONTROLLER(Optional)
B-1. NORMAL PVM
1. POWER( )
Turns the power ON or OFF. There will be a few seconds delay before the display appears.
2. SOURCE
Selects an input source.
3. ARC (Aspect Ratio Control)
Selects a screen ratio.
4. APC (Auto Picture Control)
Selects a picture mode.
5. ACC (Auto Color Control)
Selects a color mode.
6. AV1
Selects AV1 mode.
7. AV2
Selects AV2 mode.
8. PC
Selects PC mode.
9. HDMI
Selects HDMI mode.
10. AUTO
Auto geometry adjustment in the RGB-PC source.
11. MUTE
Not operating.
12. MENU
Activates and exits the On Screen Display.
13. EXIT
Exits the On Screen Display.
14. VOL(◀ & ▶)
Accepts your selection.
15. UP/DOWN (▲/▼)
Moves upwards or downwards in the OSD menu.
16. ENTER
Enters an OSD submenu or accepts your selection
17. INFO
Displays the information about input source.
18. HOLD
Stops the Trigger function.
- 7 -