9.7-INCH TFT-LED PUBLIC VIEW MONITOR INSTRUCTION MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.
………………………………………………………….…… 2~3 …………………………………………………………….......................... 4 ……………………………....................... 5 SAFETY INSTRUCTION CAUTIONS FCC RF INTERFERENCE STATEMENT CONNECTING WITH EXTERNAL EQUIPMENT …………………………………… 6 ………………………………………………………………… 7~8 ……………………………………………………….. 9 ~ 25 MOUNTING GUIDE …………………………………………………………………….. 26 ……………………………………………………………… 27 ~ 28 ……………………………………………………………………… 29 ………………………………………………….........
Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. 14 Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du matériel et être facile d`accès ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel.
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
A. BACK PANEL CONTROL 3 1 4 2 5 1 6 7 1 1 1. AC 24V IN 2. VGA IN 3. VIDEO(AV) IN 4. VIDEO (AV) OUT 5. CAM OUT 6. SD CARD READER (Optional) 7. USB 2.
B. REMOTE CONTROLLER(Optional) B-1. NORMAL PVM 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Selects an input source. 3. ARC (Aspect Ratio Control) Selects a screen ratio. 4. APC (Auto Picture Control) Selects a picture mode. 5. ACC (Auto Color Control) Selects a color mode. 6. AV1 Selects AV1 mode. 7. AV2 Selects AV2 mode. 8. PC Selects PC mode. 9. HDMI Selects HDMI mode. 10. AUTO Auto geometry adjustment in the RGB-PC source. 11.
B-2. CARD READER PVM 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Selects pc or video(Camera, AV, C/R) sources. 3. AUTO Auto geometry adjustment in PC Source. 4. MUTE Not operating. 5. MENU Activates and exits the On Screen Display. 6. EXIT Exits the On Screen Display. 7. VOL(◀ & ▶) Accepts your selection. 8. UP/DOWN Moves to OSD menu. 9. ENTER Accepts your selection or displays the current mode. 10. INFO Input mode information Display. 11.
C. FRONT & BACK KEY CONTROL 5 6 7 8 9 10 11 1 2 3 4 1. BUILT-IN CAMERA Image of camera. 2. IR Sensor Remote controller sensor. 3. POWER LED Turned on: Green color. Turned off: LED off. 4. RECORDING INDICATOR LED This LED indicates the recording status by blinking the LED light. User can choose the LED blink. 5. POWER ON/OFF( / I ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 6. MENU/EXIT Activates and exits the On Screen Display.
OSD Menu Description All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. (On Screen Display) To adjust the OSD screen: 1. Press the MENU button to enter the OSD menu. 2. Press the ▲/▼ buttons to select the desired option. The selected option is highlighted. 3. Press the VOL(+) button to enter the submenu for adjusting items. 4. Change the value you wish to adjust by using the VOL(+) / VOL(-) buttons. 5. Press the VOL(-) button to exit the submenu for adjusting items. 6.
B. SOUND/FUNCTION Option Function Value VOLUME Not operating. MUTE Not operating. DATE TIME Sets the date time on the screen. See the table on Next page. RECORDING Sets the recording indication text. See the table on Next page.
DATE TIME Option Function Value DATE TIME Activates the feature of Date Time. Off or On BLINK This function is for blinking Date & Time texts. Off or On POSITION Selects the location of Date Time text. Top, Bottom YEAR* Selects the wanted year. 2000~2100 MONTH* Selects the wanted month. 1~12 DAY* Selects the wanted day. 1~31 HOUR* Selects the wanted hour. 0~23 MINUTE* Selects the wanted minute.
RECORDING Option Function Value INDICATOR LED Sets the light color of recoding LED Off or On TEXT DISPLAY Activates the feature of Recording Text. Off or On TEXT BLINK This function is for blinking Recording text. Off or On TEXT SIZE Selects the size of Recording text. TEXT Selects the wanted phrases.
C. PC (Only PC Mode) Option Function Value CONTRAST Adjusts intensity of the image. 0 ~ 100 BRIGHTNESS Adjusts brightness of the screen. 0 ~ 100 PC ADJUST Adjusts the PC Mode. See the table on Next page. COLOR MODE Adjusts the vertically picture position. See the table on Next page. PICTURE MODE Adjusts the vertical noise of screen image. RESOLUTION Not operating. ※ Unavailable in Camera, AV Mode (Only PC Mode).
PC ADJUST Option Function Value AUTO ADJUST Auto geometry adjustment. H POSITION Adjusts the horizontally picture position. 0 ~ 100 V POSITION Adjusts the vertically picture position. 0 ~ 100 CLOCK Adjusts the vertical noise of screen image. 0 ~ 100 PHASE Adjusts the number of horizontal picture elements. 0 ~ 100 SEL AUTO Selects the type of auto adjustment. MANUAL1), AUTO2) 1) Manual: Operating the auto adjustment of the screen only the first time.
D.SETUP Option Function Value Language Sets the language of the OSD menu. OSD Sets the OSD. English, German, French, Italian, Spanish, Nederlands and Korea See the table on Next page. Locks all buttons of the monitor. Key Lock 1) Off or On Note: Use remote controller to unlock. AV Mode: 16:9, 1:1, 4:3, 14:9, Zoom1, ARC Sets the screen ratio. Zoom2, Under PC Mode: MOTION DETECTION See the table on Next page. RECALL Resets the monitor settings to the factory default.
OSD Option Function Value H POSITION Move OSD horizontally on screen right or left. 0 ~ 100 V POSITION Move OSD vertically on screen up or down. 0 ~ 100 OSD TIMER Adjust OSD displaying time. 5 ~ 60 TRANSPARENT Adjust OSD transparent. Off or On MOTION DELECTION Option Function ENABLE Activates the motion detection feature. INPUT Selects the input source for the motion detection. BUZZER Not operating.
Menu of the M/P (Media Player) • Connect USB & SD card devices 1. Connect USB & SD card devices to USB slot which are on the slide of the monitor set. • Removing the USB & SD card devices from Monitor 1. Return to main menu and press ESC. 2. Remove the USB & SD card devices from Monitor. - Entering Card Reader, displaying main menu. [MUSIC] [MOVIE] [MUSIC PHOTO] Option Function PHOTO Displaying photo and slideshow. MUSIC Playing music in the USB device.
A. PHOTO JPEG File Viewing Options - When you select Photo in entry menu, 1. Press the USB button and then use ◀/▶ button to select the Photo. 2. Press the SEL button. 3. Press the ▲/▼ button to select photo file. 4. Press the SEL button for 1 picture display for slideshow. 5. Press exit or press the ESC button to return to the USB menu. Slideshow 1. Press ◀/▶ button to select the Photo. 2. You can choose the slide show effect, frequency and play mode in the USB Setup. 3.
B. MUSIC - Purchased MP3/music files may contain copyright restrictions. 1. Press ◀/▶ button to select the Music. 2. Press the SEL button. 3. Press the ▲/▼ button to select desired music file. 4. Press the SEL button. Then the music starts. 5. Press exit or press the ESC button to return to the USB menu.
C. MOVIE - Select the Movie 1. Press ◀/▶ button to select the Movie 2. Press the SEL button. 3. Press the ▲/▼ button to select desired movie file. 4. Press the SEL button. Then the movie starts. 5. Press exit or press the ESC button to return to the USB menu.
D. PHOTO MUSIC -Playing slideshow with music. 1. Press the USB button and then use ◀/▶ button to select the PHOTO MUSIC. 2. Press the SEL button. 3. Press the ▲/▼ button to select photo file. 4. Press the SEL button for picture display for slideshow. 5. Moved to music file list for music playing. 6. Press the SEL button for playing music with photo slide show. 7. Press exit or press the ESC button to return to the USB menu.
E. PHOTO Thumbnail mode - Thumbnail mode in photo. - Press ▶ button in Photo File list or ACT button in main menu 1. Press ▲/▼/◀/▶ button to select desired photo file. 2. Press SEL button to start Slideshow 3. Press exit or press the ESC button to return to the USB menu.
F. SETUP 1. SETUP- PHOTO Select Slideshow Effect -The picture display effect for the slide show. 1. Press ◀/▶ button to select the Setup. 2. Press the SEL button enter the Setup menu. 3. Press the ▶ and then use ▲/▼ button to select Slideshow EFFECT. 4. Press the ▶ and then use ▲/▼ button to select the desired Effect. 5. Press exit or press the ESC button to return to the USB menu. Select Slideshow Speed -The picture display interval for the slide show. 1. Press ◀/▶ button to select the Setup. 2.
2. SETUP-SYSTEM Select SUBTITLE LANG. - The menus can be shown on the screen in the selected language. First select your language. 1. Press ◀/▶ button to select the Setup. 2. Press the SEL button to enter the Setup menu. 3. Press the ▲/▼ button to select the SYSTEM SETUP. 4. Press the ▶ and then use ▲/▼ button to select SUBTITLE LANGUAGE. 5. Press the ▶ and then use ▲/▼button to select the desired language. 6. Press exit or press the ESC button to return to the USB menu.
Wall mount(Optional) 1) Using the 75 mm VESA holes. 2) Using the VESA standard wall mount design and the 75mm hole pattern on the back side to install the LCD monitor to the wall. 75 75 M4x10 screws ※ Attention! You must use four M4x10 screws to assemble this monitor and the wall mount bracket. ▶ ACCESSORIES 1. Power cable (Optional). 2. Power Supply (Optional). 3. User’s manual. 4. Remote controller (Optional). 5. Batteries (Optional). 6. PC RGB cable (Optional). 7. Wall mount (Optional).
POWER CONSUMPTION MODE POWER CONSUMPTION ON < 16W POWER OFF < 0.5W LED INDICATOR The power management feature of the monitor is comprised of two stages: ON(GREEN) and POWER OFF(LED Off).
1. Monitor Specification 9.7" 9.7˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.192(H) x 0.192(V) LCD-Type BRIGHTNESS: 300cd/m² (Typical) CONTRAST RATIO: 600:1(Typical) VIEWING ANGLE: 178°/178°(H/V) RESPONSE TIME: 35msec(Typical) RESOLUTION (H x V) FREQUENCY INPUT/OUTPUT SIGNAL ACTIVE DISPLAY AREA (H x V) PACKING DIMENSIONS (W x H x D) 1024x768 @60Hz HORIZONTAL: 31~48KHz, VERTICAL: 56~60Hz CAMERA OUT VIDEO (1ch input 1.0Vp-p, 75Ω terminated, loop-through out) VGA (RGB-PC) 196.608mm x 147.
2. Camera Specification Built-in PIX CAMERA ITEM Image Sensor Horizontal Resolution NTSC 1/3” Sony Supper HAD II CCD (ICX638/639AKA) Color Mode: 620TVL; B/W Mode: 680TVL Effective Pixel 768(H) X 494(V) Sync. System Internal Lens 4mm Fixed Lens Min. Illumination 0.001 Lux (F1.2) Electronic Shutter 1/60~1/100,000 S/N Ratio More than 52dB Gamma 0.
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO
MEMO
