User`s guide

1
Precautions
Please read this user’s manual thoroughly prior to use the unit for
its easy and convenient use.
 Please always handle the unit with care. Otherwise, the LCD display
panel can be damaged when it gets any physical shock and/or you
drop it to the ground. Please note that we may charge for the
replacement of the display panel even the unit is under warranty, when
it is broken due to any physical shock or user’s misuse.
 Avoid touching the screen. To clean the screen, wipe the screen with a
clean, soft and dry towel and be careful not to damage the LCD display
panel.
 Try not to insert any foreign objects inside the unit. It may cause
malfunction or damage to the unit.
 To reduce the risk of fire or electric shock, do not expose the LCD to rain
or moisture.
 Please do not connect the power wire to the video input/output port. It
may cause malfunction when AC or DC power is inserted.
 Please use only the authorized battery charger included in the package.
Otherwise, it may cause fire or explosion when using an unauthorized
battery charger. (When red LED flicks in recharging, please request A/S)
 The built-in Li-Polymer battery (11.1V / 2200mA) is under six months
warranty from the purchase date. Please do not use it with another
type of battery on this portable monitor as it may cause fire or
explosion.
 Please do not disassemble the built-in battery and avoid making any
short circuit of it.
 The battery can be damaged when a short circuit is created at the
power connecting port or when the polarity of the power cable is
connected in reverse.
 When supply power to the camera through the test monitor, please use
the power harness (DC jack) enclosed in the package.
 When supply power to the camera, please connect first the power cable
to the camera and then turn on the unit. Otherwise, it may create a
short circuit and the unit can be turned off automatically in order to
protect the battery. When a short circuit is produced, please turn off
the test monitor and then remove and re-insert the power harness (DC
jack). Then turn the unit on again.
 Please keep the unit inside the carrying bag in order to protect the LCD
screen from scratches.
 Keep the unit away from any electronic conductive materials or liquid
subject.
 If the LCD display emits smoke, abnormal noise, or a strange odor,
immediately turn it off and contact your distributor.
When the unit is not working properly, please contact your distributor.
Please do not disassemble the unit by yourself. (When unauthorized
person modified or made damage on the product trying to repair it, we
may charge you with the fee.)