User`s guide

4-1-1-3-1. RS485(TX) MODE

MODE: RS485 PROTOCOL: SAMSUNG ADDR: 001 BAUD: 9600

PTZ CONTROL

▲▼: TILT ◀▶: PAN SET: PT <-> ZF MODE: PTZ<->OSD

• It displays the current setting mode at the top of the screen.

• Press SET KEY shortly in MULTI WAY KEY selection to select PAN/TILT mode or

ZOOM/FOCUS mode.

- RED : P.T.Z MODE - BLUE : OSD MODE

In case of BOX/DOME Camera, Hold ENTER KEY to select OSD Menu.

• Press Mode KEY to select CAMERA OSD control mode

• Press MENU KEY to control CAMERA OSD and press ESC KEY to exit OSD MENU.

• Press EXIT KEY to go to the previous mode. (In CAMERA OSD mode, switch to

PAN/TILT mode first in order to exit.)

• Press ◀/▶/▲/▼ buttons following the OSD guidance on the screen.

4-1-1-3-2. RX MODE

MODE: RX BAUD: 9600

00 01 0F AB ……….

• It displays the current setting mode at the top of the screen.

• It displays the connection status of RS-485 line indicated by HEX value.

• The received data via RS-485 port can be displayed maximum in 8 lines in

BYTE (8 byte).

• To go to the previous menu, press and hold the SET button.