User`s guide

4-1-1-2. ANGLE MODE

• When selecting ANGLE MODE, it displays a green box and the indication lines

of the camera angle zone.

• Press the SET MENU button to select the size of the green box. Press again the

SET MENU button and select the side line of the box you want to adjust, and

then press ◀/▶/▲/▼ buttons to set the position of each lines.

• Press SET MENU button several times to return to the previous mode.

4-1-1-3. RS485 & COAX MODE (PTZ / OSD Control)

RS485 & COAX MODE

MODE RS485

PROTOCOL SAMSUNG

ADDRESS 001

BAUDRATE 9600

START

EXIT

▲▼: MOVE ◀▶: EDIT

• MODE: In RS485(Tx.), COAX mode, you can control the PTZ & Camera OSD.

In Rx. mode, it receives the PTZ control data(HEX value) and displays the data.

• PROTOCOL: Select the protocol of your PTZ camera

• ADDRESS: Select the address of your PTZ device

※ In OSD mode, you can control Camera regardless of ADDRESS.

• BAUDRATE: Select com speed. (2400, 4800, 9600, 19200bps)

※ In OSD mode, you can control Camera regardless of BAUDRATE.

• START: After setting the above menu, select START to control the PTZ.

• EXIT: Exit from the Menu mode.

Indication lines:

Please move the indication

lines of the green box to

focus the angle of the

camera to a specific zone.