Highly Efficient Portable Test Monitor User's Guide SC-LFC56LC Ultra-low power LED BACKLIGHT Monitor COAX (UP THE COAX) Remote Control SC-LFC56LC
Precautions Please read this user’s manual thoroughly prior to use the unit for its easy and convenient use. Please always handle the unit with care. Otherwise, the LCD display panel can be damaged when it gets any physical shock and/or you drop it to the ground. Please note that we may charge for the replacement of the display panel even the unit is under warranty, when it is broken due to any physical shock or user’s misuse. Avoid touching the screen.
1. Introduction 1-1. Overview The SC-LFC56LC is a highly efficient multi-functional portable test monitor with LED backlight display panel of 5.6” wide display. With the SC-LFC56LC, you can easily adjust the camera focus and control the P/T/Z for Speed Dome Cameras. Furthermore, SC-LFC56LC supports the camera OSD menu control feature (UP THE COAX) which you can set Camera OSD menu via COAX communication or RS-485 from the remote side. Also it provides Full Color Bar to check the video signal.
1-4. How to use it • To adjust the camera angle Adjusting the camera angle at the elevator Adjusting the camera angle at the parking lot • To adjust the video level of Tx/Rx. of UTP transmission [UTP Tx. / Rx. Adjustment] Useful features to adjust the video level of UTP receiver or to check the video signals of each surveillance areas.
2. Components Accessories SC-LFC56LC Power Adapter Carrying Bag DC Jack for camera power supply 3. Product Parts and Peripheral Device Connection 3-1. Part Names and Functions 3-1-1. Interface ① NO ② ③ ④ ⑤ ⑥ MARKING ⑦ FUNCTION ① 12V To charge the built-in LI-Polymer battery with the charger. Or, to supply power to the camera (DC12V/500mA) with power supply harness.
3-1-2. Level Meter Indicator & Button Function ① ② ① Level Meter Indicator • A. Level: It indicates the brightness level of the video (Amplitude/Sync level) in percentage. • F. Level: It indicates the color level of the video (Frequency/Burst level) in percentage. ※ Please refer to the menu 3-1-2-1 for more details.
* Zoom In: When monitoring the video, press and hold the DOWN button for 2 seconds to zoom in the video. Please note that the full frame of the video may not be displayed. 3-1-2-1. Level Meter Indicator The Video Level Meter indicates the Sync. and Burst Level of the CVBS video signals in A. Level and F. Level respectively. It is useful when you adjust the A. level and F.
3-2-1. Video input • The video is displayed when you connect the camera or video signal into VIDEO input. 3-2-2. Pattern signal out & Loop Through video out • Select Pattern Out ON when you check the wiring status, monitor and DVR. • When the Pattern Out is off, you can see the video by looped through output. 3-2-3. VGA input • Check the video output in XVGA (1024× 768/60Hz) from DVR or from PC. • It supports XVGA in maximum and a higher resolution may not displayed in normal. 3-2-4.
• LEVEL-METER ON: It shows the CVBS video signal level. • EXIT: EXIT from the Main Menu. 4-1-1-1. SETUP MENU SETUP MENU INPUT CVBS BRIGHT 32 CONTRAST 32 SAT 63 HUE 32 DEFAULT OFF ▲▼: MOVE ◀▶: EDIT SET: SET • INPUT : To select the displaying video in CVBS or VGA mode. • BRIGHT : To adjust the brightness (0 ~ 63 steps, default: 32). • CONTRAST : To adjust the contrast (0 ~ 63 steps, default: 32). • SAT : To adjust the saturation (0 ~ 63 steps, default: 63).
4-1-1-2. ANGLE MODE Indication lines: Please move the indication lines of the green box to focus the angle of the camera to a specific zone. • When selecting ANGLE MODE, it displays a green box and the indication lines of the camera angle zone. • Press the SET MENU button to select the size of the green box. Press again the SET MENU button and select the side line of the box you want to adjust, and then press ◀/▶/▲/▼ buttons to set the position of each lines.
※ Built-in Protocol: Other protocols are available upon request in case that the camera manufacturers provide us with their protocols in advance.
4-1-1-3-1. RS485(TX) MODE MODE: RS485 PROTOCOL: SAMSUNG ADDR: 001 PTZ CONTROL ▲▼: TILT ◀▶: PAN SET: PT <-> ZF BAUD: 9600 MODE: PTZ<->OSD • It displays the current setting mode at the top of the screen. • Press SET KEY shortly in MULTI WAY KEY selection to select PAN/TILT mode or ZOOM/FOCUS mode. - RED : P.T.Z MODE - BLUE : OSD MODE In case of BOX/DOME Camera, Hold ENTER KEY to select OSD Menu.
4-1-1-3-3.COAX [UP THE COAX] Control MODE: COAX PROTOCOL: PELCO-C PTZ CONTROL ▲▼: TILT ◀▶: PAN SET: PT <-> ZF MODE: PTZ<->OSD • It displays the current setting mode at the top of the screen. • Press SET KEY shortly in MULTI WAY KEY selection to select PAN/TILT mode or ZOOM/FOCUS mode. - RED : P.T.Z MODE - BLUE : OSD MODE In case of BOX/DOME Camera, Hold ENTER KEY to select OSD Menu. • Press Mode KEY to select CAMERA OSD control mode. • Press MENU KEY to control CAMERA OSD and ESC KEY to exit OSD MENU.
4-1-1-4. PATTERN OUT • With built-in video pattern generator, it is easy to check the wiring status, the monitor and the DVR. Select PATTERN OUT ON by pressing the ▼ and/or ▲ buttons, when you want to display the full color bar pattern generator. When the Pattern Out mode is off, the video input by loop through is displayed. 1 0 0 100 89 77 72 46 BURST SYNC (COLOR PATTERN GENERATOR) (VIDEO OUT LEVEL) 4-1-1-5. LEVEL ON / OFF • It displays CVBS video signal level with SYNC (Brightness /A.
5. Specifications SCLFC56L MODEL LCD DISPLAY RESOLUTION 640 X (RGB) X 480 SIZE 5.6" PIXEL PITCH 0.0588(W) X 0.1764(H) BRIGHTNESS(cd) Min.:300, Nor.:350 ANGLE OF VIEW TOP 50° BOTTOM 70° LEFT 70° RIGHT 70° RESPONSE (ms) INPUT VIDEO OUTPUT Indication range for CVBS video signal level CONNECT PORT POWER NTSC/PAL 1.0Vp_p, XVGA 1024x768, 60Hz PATTERN ON PATTERN CVBS OFF VIDEO OUT A LEVEL SCLFC56LC 15 CVBS COAX COM. SUPPORT FULL COLOR BAR LOOP THROUGH NTSC/PAL 1.
6. Warrantee Certificate Product Name Model No. Date of Purchase Place of Purchase Customer Distributor Warranty Period Name Contact info. Name Contact info. 1 Year from the date of purchase This product has passed thorough quality control and test, and if this gets broken during normal use, we provide 12 months warranty service. Check this warranty prior to use the unit. Please contact the distributor after checking out any defect in the products.
MEMO 16
MEMO 17
MEMO 18
is new corporate name of Samsung CCTV Service Co., Ltd. #506, Sunil Technopia, 440, Sangdaewon-dong, Joongwon-gu, Seongnam-si, Gyeonggi-do, Korea TEL +82-(0)31-777-3508 FAX +82-(0)31-777-3512 http://www.sscctv.
