User manual

Hybrid Portable Test Monitor
14
4-1-1-4-3.COAX [UP THE COAX] Control
• Displaysthecurrentsettingmodeatthetopofthescreen.
• PresstheSETKEYinMULTIWAYKEYselectiontoselectPAN/TILTmodeorZOOM/FOCUSmode.
-RED:P.T.ZMODE-BLUE:OSDMODE
• PresstheModeKEYtoselecttheCAMERAOSDcontrolmode.
• PresstheMENUKEYtocontroltheCAMERAOSD,andtheESCKEYtoexitOSDMENU.
ForBOX/DOMECameras,HoldtheENTERKEYtoselectOSDMenu
• PresstheEXITKEYtogotothepreviousmode.InCAMERAOSDmode,switchtoPAN/TILTmoderst
inordertoexit.
• Press///buttonsfollowingtheOSDguidanceonthescreen.
• Listofcontrollablemodels




No. Company Protocol Product Model
01 Samsung Techwin PELCO-C All models to support
COAXcommunication(WINNER5)
02 Pelco PELCO-C All models to support
COAX communication
03 Dongyang Unitech PELCO-C All models to support
COAXcommunication(PIXIM)
04 SamsungE A1 All models to support
COAX communication
※PELCO-CPROTOCOLinHybridTestmonitoriscompatiblewithalltheproductmodelsabove.
Also,thisproductcancontrolCOAXinaremotesidethroughtheautomaticNTSC/PAL
recognitionwithoutanyset-up.
4-1-1-4-4. ANALYSER
• UsingAnalysermode,thetestmonitorrecognisesthereceiveddatapacketanddisplaystheaddress
and command.
• Addr: Show the address.
• Cmd: Show the command
• Packet:ShowtheHexcodeofthereceiveddata.