User manual

Hybrid Portable Test Monitor

3-2-4. PTZ & OSD Control Through RS-485

• ConnecttoPTZReceiverand/orSpeedDomeCameraasacontroller.Also,connecttocontrolleras

aPTZreceivertocheckifthecontrolleroutputsdataaccurately.

※Powerovercoaxfeature(Video+Power)forHD-SDI&AnalogueVPcameraandVP

transmission devices.

• UsingthePowerOverCoaxfeatureoftheHybridTestmonitor,it’spossibletosupplypowertoVP

(Video+power)analogueandHD-SDIcamerasviacoaxialcable.

• POC(PowerOverCoax)featureforHD-SDIVPcamera(Optional):Whenit’snecessaryto

usethePowerPOC(PowerOverCoax)feature,forinstallationandmaintenanceofaHD-SDIVP

cameraorotherHD-SDIVPTransmissionproduct,pressandholdthe‘Enter’keyfor3secondsor

more,andtheVPfeatureisactivated;afterdetectingifthedeviceautomaticallysupportsthePOC

feature.

• PowerOverCoaxfeatureforAnalogueVPcamera(Optional):Whenit’snecessarytousethe

PowerPOC(PowerOverCoax)feature,forinstallationandmaintenanceofananalogueVPcamera

orotherVPTransmissionproduct,pressandholdthe‘Enter’keyfor3secondsormore,andtheVP

featureisactivated;afterdetectingifthedeviceautomaticallysupportsthePOCfeature.

4. Menu Setting

4-1. MENU Mode

4-1-1. SELECT MENU

• PressMENUButtonandmainmenuisdisplayed,asshownbelow.

• PressthedirectionalbuttonstomoveUp,Down,RightorLeft.

Themenumodeisautomaticallyswitchedoffifyoudon’tpressanybuttonsforafewminutes.



4-1-1-1. PICTURE SET

