EC 17 / 19 Series Cost Effective Single Rail LCD Console User Manual Rev 2.
EC 17 /19 Series User Manual Packing List The complete EC 17 / 19 package consists of: One 1U 19” rack mount console Two rails with front and rear bracket One VGA cable One USB cable One DC power adapter One power cord One user manual CD One quick installation guide Six flat screws (four for rail mount to console body) Check to make sure that the unit was not damaged in shipping. If you encounter a problem, contact your dealer.
EC 17 /19 Series User Manual place anything over power cord. The power cord must rate for the voltage and current marked on the product’s electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and the current rating marked on the product. 11. All cautions and warning on the equipment should be noted. 12. If the equipment is not in use for long time, disconnect the equipment from mains to avoid being damaged by transient over-voltage. 13.
EC 17 /19 Series User Manual Index of Contents Packing List .......................................................................................................... I Safety Instructions ................................................................................................ I Index of Contents ............................................................................................... III 1. General Information ..................................................................................
EC 17 /19 Series User Manual 1. General Information 1.1 Overview The KVM console is an ideal solution for network administration with multiple servers / platforms. Their 17-inch and 19-inch large size TFT LCD color display and ultra-low-profile compact industrial keyboard / touchpad provide the user-friendliest and most reliable environment for network administrators.
EC 17 /19 Series User Manual 1.2 Features EC 17 / 19 single rail LCD console provides more competitive price and more flexible combination. It keeps all original characteristic of single rail LCD console, easy to install and use. With replaceable keyboard design, you can easily replace more than 5 various keyboards. It saves cost and strengthens your competitive ability.
EC 17 /19 Series User Manual 1.3 1.3.1 Product Specification EC 17 Specification Model name EC 17 Number of ports 1 Dimension 515.1 x 445.6 x 43.7 mm / 20.3 x 17.5 x 1.7 inches Package Dimension 687 x 558 x 241 mm / 27.0 x 22.0 x 9.5 inches Net Weight 10.4 Kg / 22.9 lbs Gross Weight 18.0 Kg / 39.7 lbs Display Size 17 inches Panel Type Active Matrix TFT LCD Resolution Capabilities Maximum Resolution up to 1280 x 1024 (SXGA) Pixel Pitch Supports 0.264 mm x 0.
EC 17 /19 Series User Manual Figure 1-1.
EC 17 /19 Series User Manual 1.3.2 EC 19 Specification Model name EC 19 Number of ports 1 Dimension 555.1 x 445.6 x 43.7 mm / 21.9 x 17.5 x 1.7 inches Package Dimension 727 x 558 x 241 mm / 28.6 x 22.0 x 9.5 inches Net Weight 11.2 Kg / 24.7 lbs Gross Weight 19.0 Kg / 41.9 lbs Display Size 19 inches Panel Type Active Matrix TFT LCD Resolution Capabilities Maximum Resolution up to 1280 x 1024 (SXGA) Pixel Pitch Supports 0.098 mm x 0.
EC 17 /19 Series User Manual Figure 1-2.
EC 17 /19 Series User Manual 2. Panel Controls and OSD Function Controls Description Soft power on/off button. Adjacent LED is lit when on. Auto Auto-synchronize and scale down display to any valid factory preset timings. Press to scroll the function you want to adjust. Press to scroll the function you want to adjust. Menu To access the main menu. This button also acts as the “Enter” button. Table 2-1. Panel Controls Figure 2-1. EC 17 / 19 OSD Control Bar 2.1 Auto Tune Press the “auto tune” button.
EC 17 /19 Series User Manual Exit 3. Press the“menu”button to enter,and you will see: VGA / DVI 4. Use the “Down” and “Up” button to select the input source of signal. 5. Press the “menu” button to enter 2.3 Brightness 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune. Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the“menu”button to enter. 4. Use the“Down”and“Up”button to adjust the brightness of the display. 5.
EC 17 /19 Series User Manual 3. Press the “menu” button to enter. 4. Use the “Down” and “Up” button to adjust the contrast of the display. 5. Press the “menu” button to enter. 2.5 Color 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune. Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the “menu” button to enter.
EC 17 /19 Series User Manual Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the “menu” button to enter. And you will see: Icon Description Image Pos To adjust the position of the image. OSD Pos To adjust the position of the OSD. Return To exit and return to the previous page Table 2-3. Icon Description 4. Use the “Down” and “Up” button to scroll. 5. Press the “menu” button to enter. 2.7 Language 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll.
EC 17 /19 Series User Manual Italian Spanish 4. Use the “Down” and “Up” button to scroll. 5. Press the “menu” button to enter. 2.8 Recall 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune. Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the “menu” button to enter, and you will see: Yes/ No 4. Select “Yes” button then ‘Menu” button to recall the factory setting. Select “No “ to return to the previous page. 2.
EC 17 /19 Series User Manual 3. 3.1 3.1.1 Installation Install LCD Console Into Cabinet Notes 1. Please check all peripherals according the list before installation. To make sure that the whole unit was not damaged and lost during shipping process. If you encounter any problem, please contact your dealer. 2. Before installation, make sure all peripherals and computer have been turned off. 3. The cabinet depth range must be in 508 ~ 809 mm for 17” LCD console (558 ~ 859 mm for 19” LCD console.
EC 17 /19 Series User Manual 3.1.3 Installation Steps 1. Adjust rail until one screw appear. Loose (Not release) two rear screws then adjust rear bracket to fit your cabinet. Rail 2. Install front and rear bracket on cabinet. 3. Tight-up two rear screws. 4. Repeat step 1~3 for the other side.
EC 17 /19 Series User Manual 5. Pull rail until it lock and keep the part A in front of the rail (Both sides).Then push console into left and right rails. DO NOT removes protective tapes. Part A Tape 6. Pull rail–release switch (left and right at the same time) then push console to the end.
EC 17 /19 Series User Manual 7. Install two screws in rear of the console (Both sides). Remove protective tapes. 8. Finish installation as below.
EC 17 /19 Series User Manual 3.1.4 Unload Steps 1. Make sure the console has locked and turned off. 2. Release two screws in rear of the console. (Both sides) 3. Unlock. 4. Pull the console all the way out. Then pull rail-release switch and pull console out. (Both sides) Rail-release switch 5. Push rail-lock switch on the rail and push rail back.
EC 17 /19 Series User Manual 3.2 Installing the Video Card and Video Driver Before connecting the LCD console, make sure your computer has a video card already installed for the monitor. After you connect the console, install the video software driver. The video driver is supplied by the video card manufacturer and may be found on the CD-ROM that came with your computer. If you need information on installing a video card or video driver, refer to the manual that came with your video card. 3.2.
EC 17 / 19 Series User Manual 3.2.2 Connecting the Console To connect an LCD console to a computer, perform the following steps Figure 3-1. The rear view of LCD console 1. Turn off your computer. You should always turn off your computer before connecting or disconnecting a device. 2. Connect the video (VGA) connector of the VGA cable to the video card connector on the rear panel of your computer. 3. Connect connector of USB cable to USB ports on the rear panel of your computer. 4.
EC 17 / 19 Series User Manual You can adjust the horizontal and vertical position, contrast, and brightness to better suit your video card and your personal preference. Refer to Chapter 2 for more information on using the on-screen menu to adjust the video display. Before you begin, make sure that powers to all the devices you will be connecting up have been turned off.
