Instruction manual

REAR connection

1. DC JACK

Place the plug from the supplied table-top power supply into the DC 12V connector.

Input at the monitor is 12 volts DC from the TT universal AC supply (100-240 Vac, see specifications table

for AC/DC details).

2. S-Video INPUT

Used to connect a S-Video signal from a camera or DVR

3. HDMI INPUT

Used to connect a HDMI signal from a PC, Mega pixel Camera or DVR

4. RGB INPUT

Connect to the video output port on your PC or DVR

5. CVBS INPUT/OUTPUT (CVBS2)

Used to connect a BNC Video signal from a camera or DVR

6. CVBS INPUT/OUTPUT (CVBS1)

Used to connect a BNC Video signal from a camera or DVR

7. Audio Input

Used to connect a audio signal from a PC or DVR