Instruction manual

Operating instruction

FRONT controls

1. Menu / Exit

This button is used to bring up or disappear the controls menu.

Exits from the OSD system and the selected function

2. Down / Brightness (▼/ )

Moves down the menu lists in the OSD / Selected brightness

3. UP / VOL. (▲ / VOL. )

Moves up the menu lists in the OSD / Selected Volume

4. LEFT / SOURCE (◀

◀◀

◀ / SOURCE )

Selected MENU decreases the value / while in the normal active (Not MENU DISPLAY) mode, this button

is used to bring up Sources select Menu ( CVBS1,CVBS2,SVIDEO,RGB,DVR,HDMI)

5. ▶

▶▶

▶ (Select) / (Freeze) / AUTO

This ▶

▶▶

▶ button to choose on the menu then pushes the button & Selected MENU increases the value:

While in the CVBS, S-Video mode, press this button to FREEZE ( ) the picture for display. Press

again to exit the FREEZE image. While in the RGB mode, press this button to AUTO adjust the H/V POS,

H/V SIZE, and phase

6. PIP

Multi window activate or cancel the PIP function.

7. Power On/Off & LED

When power is applied, the monitor will come ON. This button then turns the monitor on and OFF.

LED - A green indicator lights when the power is ON and input signal .

A red indicator lights when the power is OFF (the indicator blink when the power is ON and Input No

signal)

8. Sensor Widow

Remote Control. Receives signal from the Remote controller

9. Speaker