7” – 19” PROFESSIONAL TFT-LCD 700TVL COLOUR MONITOR ART. 41637 - 41639 SVisual series Please read this manual thoroughly before use and keep it for future reference Via Don Arrigoni, 5 24020 Rovetta S. Lorenzo (Bergamo) http://www.comelit.eu e-mail: export.department@comelit.
FCC COMPLIANCE FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
Warnings and Cautions WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. CAUTION Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
PRECAUTIONS AND IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS – All of the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS – The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS – All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS – All operating and use instructions should be followed. 5. CLEANING – Unplug the unit from the outlet before cleaning.
Alternately, this unit may be equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. 13. OVERLOADING – Do not overload outlets and extension cords as this can result in a risk of fire or electric shock. 14.
Table of Contents Features ------------------------------7 Operating Instructions - Controls - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8~9 Connections - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -10 User Controls - Menu Operations - - - - - - - - - - - - - - - - - - - - - - - - - - -11~15 Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - 16~19 Dimensional drawings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20 Remote Control - - - - - -
Features • Super High-Resolution with 700TVL (Horizontal) • High Quality Advanced CCTV LCD Monitor(With Protection glass) • De-Interlace technology Efficiently Eliminates Shaky and blurry image Progressive Scan • 3D Comb Filter Function Clear image • Superior Color Reproduction • VESA Wall & Ceiling mount Compatible • Temporal noise reduction • HDMI receiver • PIP, PBP Multi view Display • Protection glass 7
Operating instruction FRONT controls 1. Menu / Exit This button is used to bring up or disappear the controls menu. Exits from the OSD system and the selected function 2. Down / Brightness (▼/ ) Moves down the menu lists in the OSD / Selected brightness 3. UP / VOL. (▲ / VOL. ) Moves up the menu lists in the OSD / Selected Volume 4.
REAR connection 1. DC JACK Place the plug from the supplied table-top power supply into the DC 12V connector. Input at the monitor is 12 volts DC from the TT universal AC supply (100-240 Vac, see specifications table for AC/DC details). 2. S-Video INPUT Used to connect a S-Video signal from a camera or DVR 3. HDMI INPUT Used to connect a HDMI signal from a PC, Mega pixel Camera or DVR 4. RGB INPUT Connect to the video output port on your PC or DVR 5.
Connections To make a normal connection to the monitor, bring a cord from a camera, or other video Source to one of the BNC jacks or from a PC to the PC jack on the back of the monitor. Either the left or right BNC jack can be used for input. The other jack may be optionally connected to another user of the same signal. Auto Termination The input circuit of the monitor normally terminates the incoming Cable in 75Ω but these BNCs jack are auto-terminating.
User Controls - Menu Operations RGB (& DVR) Mode RGB Mode : General PC input mode DVR Mode : The optimized format to synchronize a monitor and a DVR for the best resolution. NTSC : 640 x 480(60Hz), 672 x 480(60Hz) PAL : 672 x 580(50Hz), 800 x 600 (75Hz) Main menu Volume Contrast Brightness Sharpness Advanced PIP Menu Color Temp OSD Menu Source 0 +58 +64 +6 ► ► ► ► RGB Select one of the options using ▲ or ▼. Adjust the chosen item using ◀ or ▶. Exit from item by pressing Menu.
PIP Menu PIP Menu PIP Size Position Source OFF Small POS1 CVBS1 PIP choose ON/OFF multi window activate or cancel the PIP function Size select the PIP display size (Small/Medium/Large/PBP) Position is used to adjust the PiP display position.
CVBS (& S-Video) Mode Press the MENU button to display the Main Menu.The follow setup menu will appears. Main Menu Volume Contrast Brightness Color Tint Sharpness Advanced OSD Menu Source 0 +62 +70 +64 0 +6 ► ► CVBS1 Volume, Contrast, Brightness Change the Volume, Contrast & Brightness according to personal preference. Color used to minutely adjust color. Tint adjusts all the colors on the screen, but is most noticeable to the eye in reds and yellows, And is also usually set for pleasing face tones.
HDMI Mode Main menu Volume Contrast Brightness Sharpness Advanced PIP Menu Color Temp OSD Menu Source 0 +58 +64 +6 ► ► ► ► HDMI Select one of the options using ▲ or ▼. Adjust the chosen item using ◀ or ▶. Exit from item by pressing Menu. Volume, Contrast, Brightness, Sharpness Change the Volume, Contrast, Brightness & Sharpness according to personal preference.
Color Temp Menu Color Temp Color Temp User 6500K ▶ Color Temp choose different preset color temperatures or set your own customized color parameters User is used to user control color ton ( R / G / B ) OSD Menu OSD Menu Language Blending H Position V Position Time English +5 +402 +338 40 Language Change the OSD language according to personal preference Blending is used adjust the opaqueness of the background of the OSD.
Specification Art. 41637 Color TFT-LCD Monitor Display Source LCD 2 COMPOSITE VIDEO / S-VIDEO/VGA/HDMI LCD Panel 17.0" TFT LCD Panel Active Display Area (Diagonal) 17.0 inches Pixel Format 1280 (H) x 1024 (V), RGB Vertical Stripe Pixel Pitch 0.264 mm x 0.264 mm Color Depths 16.7M Colors Contrast Ratio 1000 : 1 (Typical) Brightness 250 cd/m2 Viewing Angles (Left/Right/Up/Down) 80°/ 80°/ 80°/ 80° Light source / Lifetime 2CCFLs / 50.
Operating Temperature 0 ~ 40 °C Storage Temperature 0 ~ 50 °C Case Material Plastic Net (W x H x D) 382.5 x 416 x 200 mm (with stand) Packing (W x H x D) 485 x 505 x 250 mm Dimensions Net 6.6 Kg Packing 8.
Art. 41639 Color TFT-LCD Monitor ITEM SPECIFICATION Display Source LCD 2 COMPOSITE VIDEO / S-VIDEO/VGA/HDMI LCD Panel 19.0" TFT LCD Panel Active Display Area (Diagonal) 19.0 inches Pixel Format 1280 (H) x 1024 (V), RGB Vertical Stripe Pixel Pitch 0.294 mm x 0.294 mm Color Depths 16.7M Colors Contrast Ratio 1000 : 1 (Typical) Brightness 300 cd/m2 Viewing Angles (Left/Right/Up/Down) 80°/ 80°/ 80°/ 80° Light source / Lifetime 2CCFLs / 50.
Storage Temperature 0 ~ 50 °C Case Material Plastic Net (W x H x D) 420 x 429 x 200 mm Packing (W x H x D) 520 x 517 x 250 mm Net 7.5 Kg Packing 9.
Dimensions drawings Art. 41637 Art.
REMOTE CONTROL ; 1. Mute Cuts off the sound 2. Power Power on / off 3. Not used 4. Display Display the screen information 5. Freeze Freezes the screen temporarily 6. PIP Multi window activate or cancel the PIP function 7. Exit Exit the OSD menu 8. Auto Auto adjust the H/V POS, H/V SIZE, Phase 9. Left / Right Keys Decreases / increases the chosen item 10. Up Key / Volume Moves up the menu lists in the OSD’/ Selected Volume 11. Menu Turns the OSD menu on / off 12.
