User manual

UltraView Color TFT LCD monitor 15 in./ 17 in./ 19 in./ 20 in. EN 3
• Avoid close proximity to other equipment that generates a strong
magnetic field.
3. Water and moisture: Do not use this appliance near water. To reduce
the risk of fire or electric shock, do not expose this unit to rain or
moisture.
4. Power cord and power cord protection: Power cords should be routed
so that they not likely to be walked on or pinched. Pay particular
attention to the location of cords and plugs, convenience receptacles,
and the point of exit from the appliance.
Do not overload the power cord or adapter.
Do not put the power cord or signal cable in humid places.
5. Product care: Do not touch the screen directly with fingers. The oils
from your skin may leave marks on the surface of the screen, which
are difficult to be removed and may damage the screen permanently.
Do not apply pressure to the LCD screen. The LCD is very delicate and
fragile component.
6. Cleaning: Clean only with a dry cloth.
7. Servicing: Do not attempt to service this unit yourself. Opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
Unplug the unit from the main AC power source and refer
servicing to qualified service personnel under the following
conditions:
• When the power-supply cord or plug is damaged.
• If liquid has been spilled or an object has fallen into the unit.
• If the unit has been exposed to rain or moisture.
• If the unit does not operate normally.
• If the unit has been dropped.
8. Lightning: For added protection during a lighting storm or when this
unit is left unattended and unused for long periods of time, unplug the
unit from the wall outlet and disconnect the cable system. This will
prevent damage to the unit due to lightning and power line surges.
9. Mains plug (2 pin/3 pin):
1. Do not remove the grounding or earth connection from the power
supply / mains plug.