7/19-INCH VALUE TFT-LCD MONITOR USER MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.
SAFETY INSTRUCTION CAUTIONS ………………………………………………………….…… 2~3 …………………………………………………………….......................... 4 FCC RF INTERFERENCE STATEMENT ……………………………....................... CONNECTING WITH EXTERNAL EQUIPMENT REMOTE FUNCTIONS 5 …………………………………… 6 ………………………………………………………………… 7 CONTROLS AND FUNCTIONS ……………………………………………………….. 8 ~ 14 MOUNTING GUIDE ……………………………………………………………………..
Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. 14 Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du matériel et être facile d`accès ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel.
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Rear Connection 1 2 3 4 5 1. DC 12V IN 2. HDMI IN 3. VGA (RGB-PC) IN 4. AV1 IN 5. AV1 OUT 6. AV2 IN 7. AV2 OUT 8 & 9. AUDIO L&R (AV1 & AV2) 10. PC STEREO IN (VGA) 11.
Remote Controller(Optional) 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Selects an input source. 3. ARC (Aspect Ratio Control) Selects a screen ratio. 4. APC (Auto Picture Control) Selects a picture mode. 5. ACC (Auto Color Control) Selects a color mode. 6. AV1 Selects AV1 mode. 7. AV2 Selects AV2 mode. 8. PC Selects PC mode. 9. HDMI Selects HDMI mode. 10. AUTO Auto geometry adjustment in the RGB-PC source. 11.
Front Key Control 1. SOURCE / Selects an input source. Enters a submenu or accepts your selection in the OSD menu. 2. MENU Activates and exits the On Screen Display. This button can also be used to move previous menu or status. 3 & 4. AUTO/▼, ▲ These buttons allow user to move the sub-menu of the activated function. AUTO/▼ : Auto geometry adjustment 5 & 6. ◀ VOL ▶ Adjust the volume and menu settings. 7. IR Sensor Remote controller sensor. 8. POWER LED Turned ON : Green color Turned OFF : LED Off 9.
OSD Menu Description All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. (On Screen Display) To adjust the OSD screen: 1. Press the Menu button to enter the OSD menu. 2. Press the ▲/▼ buttons to select the desired option. The selected option is highlighted. 3. Press the ▶ button to enter the submenu for adjusting items. 4. Change the value you wish to adjust by using the ◀/▶ buttons. 5. Press the ◀ button to exit the submenu for adjusting items. 6.
B. SOUND Option Function Value VOLUME Adjust the level of audio volume. MUTE Mutes speaker sound. 0 ~ 100 Off or On C. PC (Only PC Mode) Option Function Value CONTRAST Adjusts intensity of the image. 0 ~ 100 BRIGHTNESS Adjusts brightness of the screen. 0 ~ 100 PC ADJUST Adjusts the PC Mode. See the table on Next page COLOR MODE Adjusts the vertically picture position. See the table on Next page PICTURE MODE Adjusts the vertical noise of screen image.
PC ADJUST Option Function Value AUTO ADJUST Auto geometry adjustment. H POSITION Adjusts the horizontally picture position. 0 ~ 100 V POSITION Adjusts the vertically picture position. 0 ~ 100 CLOCK Adjusts the vertical noise of screen image. 0 ~ 100 Adjusts the number of horizontal picture PHASE 0 ~ 100 elements. SEL AUTO Selects the type of auto adjustment. MANUAL1), AUTO2) 1) Manual: Operating the auto adjustment of the screen only the first time.
D.SETUP Option Function Value Language Sets the language of the OSD menu. OSD Sets the OSD. Key Lock 1) English, German, French, Italian, Spanish, Nederland and Korea See the table on Next page Locks all buttons of the monitor. Off or On Note: Use remote controller to unlock. AV Mode: 16:9, 1:1, 4:3, 14:9, Zoom1, Zoom2, Full PC Mode: 4:3 ARC HDMI Input: 4:3, Full 2) Sets the screen ratio. 2) Full : These resolution are supported when DTV signal of HDMI is inputted.
OSD Option Function Value H POSITION Move OSD horizontally on screen right or left. 0 ~ 100 V POSITION Move OSD vertically on screen up or down. 0 ~ 100 OSD TIMER Adjust OSD displaying time. 5 ~ 60 TRANSPARENT Adjust OSD transparent. Off or On TRIGGER Option Function TRIGGER ENABLE Activates the trigger feature. TRIGGER INPUT Selects the input source for the Trigger. BUZZER Not operating.
TRIGGER OPTION N/C(Normally Closed): The Trigger function is activated when the trigger cable is opened. N/O(Normally Opened): The Trigger function is activated when the trigger cable is closed. High: The Trigger function is activated when the trigger signal is DC 2~5[V]. Low: The Trigger function is activated when the trigger signal is DC 0~0.6[V]. Note: In this case, trigger port has high status electrically, so the trigger cable has to have ground(or earth) status to be activated.
Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD monitor to the wall. Wall-mount Installation (Option) 1. The Monitor fixing bracket to the monitor using the fixing screws provided. 2. The monitor fixing bracket assembled with monitor ※ Attention! You must use four M4x10 screws to assemble this monitor and the wall mount bracket. ※ WARNING! If user use longer than M4x10 it may cause the damage on the unit. Please follow instructed bolt size & length.
▶ Pin Assignments Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND D-SUB ▶ Accessories 1. Power cord 2. Power adaptor 3. User’s manual 4. Cable (PC or HDMI) 5. Stereo cable (Option) 6. Remote controller (Option) 7. Batteries (Option) 8. Wall mount (Option) 9.
Power Consumption Mode Power Consumption Turned On < 30W Turned Off < 1W LED Indicator The power management feature of the monitor is comprised of two stages: Turned on(Green) and turned off(LED Off).
LCD Type 17’’ 19’’ Type 17˝ Diagonal AM-TFT (Active-Matrix) 19˝ Diagonal AM-TFT (Active-Matrix) Pixel pitch(mm) 0.264(H) x 0.264(V) 0.294(H) x 0.294(V) Brightness 250cd/ m² (Typical) 350cd/ m² (Typical) Contrast ratio 1000:1 (Typical) Viewing angle 170°/160° (H/V) Response time 5ms (Typ., on/off) Resolution (H x V) 1280X1024 @60Hz Horizontal: 31~64kHz, Frequency Vertical: 50~75Hz VIDEO (2ch input 1.
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO
L39ME0168 Rev.